Bently Nevada 9200-01-20-10-00 Seismoprobe Velocity Transducer

Product Overview

The Bently Nevada 9200-01-20-10-00 is a two-wire, moving-coil Seismoprobe Velocity Transducer for measuring absolute bearing-housing, casing, and structural vibration. This configuration uses a 0° mounting orientation, a 20 ft integral hardline cable, and a circular M10×1 mounting base. Its output voltage is directly proportional to vibration velocity, supporting continuous monitoring and periodic diagnostic measurements. 

Model Number Breakdown

Official ordering format: 9200-AA-BB-CC-DD
9200: Bently Nevada two-wire Seismoprobe Velocity Transducer.
AA – 01: 0° ±2.5° mounting orientation with a 4.5 Hz (270 cpm) minimum operating frequency.
BB – 20: 20 ft (approximately 6.0 m) integral hardline cable.
CC – 10: Circular mounting base with an M10×1 stud.
DD – 00: No agency approvals.

Technical Information

Industries Served

• Power generation facilities
• Oil and gas processing plants
• Chemical and petrochemical operations
• Pulp and paper production lines
• Water and wastewater facilities
• General industrial manufacturing

Application Areas

-Continuous casing-vibration monitoring on rotating machinery
-Periodic vibration checks with diagnostic instruments
-Bearing-housing vibration measurement
-Machine-structure vibration measurement
-Portable vibration measurement where external sensor power is unavailable

Key Highlights

Frequently Asked Questions

1. What does the Bently Nevada 9200-01-20-10-00 measure?
It measures absolute bearing-housing, casing, and structural vibration, with an output proportional to vibration velocity.

2. Can this 9200 configuration be used for continuous monitoring?
Yes. The 9200 is suitable for continuous machinery monitoring and periodic diagnostic measurements.

3. Does 9200-01-20-10-00 include an integral cable?
Yes. The 20 option specifies a 20 ft, approximately 6.0 m, integral hardline cable.